Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 1995 >> Prelude VTEC >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Controls - Basic Testing - 2.3L) >> Ignition Checks >> Electronic Ignition System >> Ignition Coil Power Source

Ignition Coil Power Source

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect ignition coil primary leads. Turn ignition on. Using voltmeter, check voltage between ground and Black/Yellow wire terminal of ignition coil harness.
  2. Battery voltage should be present. If battery voltage is not present, check for open in Black/Yellow wire between coil and ignition switch.
scientia non olet · About Mike's Workshop Manuals