Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 1995 >> Accord DX, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Controls - Basic Testing - 2.7L) >> Ignition Checks >> Electronic Ignition System >> Ignitor Power Source

Ignitor Power Source

WARNING: This page is about a different variant/trim than selected.

Turn ignition off. Disconnect harness connector at distributor. Turn ignition on. Using voltmeter, check for battery voltage between ground and Yellow wire of harness. If voltage is not present, check for open in Black/Yellow or Yellow wire between ignition coil and harness connector. If wire is okay, check ignition coil resistance (for internal short to ground).

scientia non olet · About Mike's Workshop Manuals