Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 1994 >> Prelude VTEC >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Servicing - M/T) >> Lubrication >> Checking Fluid Level

Checking Fluid Level

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1991 Honda Prelude, 1991 Honda Civic, 1991 Honda Accord, 1990 Honda Prelude, and 1990 Honda Civic. However, it is still accessible from the selected car via links, so may be relevant.

Check fluid level with transaxle at operating temperature. Ensure engine is off and vehicle is leveled. Remove fill plug on side of transaxle case. Fluid level should be at bottom of fill hole. On all models, tighten oil drain plug to 30 ft. lbs. (40 N.m) and oil filler plug to 33 ft. lbs. (45 N.m).

scientia non olet · About Mike's Workshop Manuals