Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 1994 >> Civic Si >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Cruise Control System) >> Diagnosis & Testing >> Main Switch

Main Switch

WARNING: This page is about a different car, the 1996 Honda Civic and 1995 Honda Civic. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition and main switch off. Remove main switch. Using a DVOM, check for continuity between main switch terminals "B" and "C" and terminals "D" and "E". See Fig 1 . If continuity exists, go to next step. If continuity does not exist, replace defective bulb inside main switch. Recheck switch continuity. If continuity is still not as specified, replace main switch.
  2. Turn main switch on. Using a DVOM, check for continuity between main switch terminals "A" and "B", "B" and "C", and "D" and "E". See Fig 1 . If continuity exists, main switch is okay. If continuity does not exist between terminals "A" and "B", replace main switch.
  3. If continuity does not exist between terminals "B" and "C" and terminals "D" and "E", replace defective bulb inside main switch. Recheck switch continuity. If main switch continuity is still not as specified, replace main switch.
Fig 1: Main Switch Terminals
G93H01499Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About Mike's Workshop Manuals