Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Honda >> 1993 >> Prelude VTEC >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Power >> Overhaul >> Valve Body Unit >> Inspection

Valve Body Unit: Inspection

  1. Check cut-off valve for signs of scratching and/or scoring. Insert cut-off valve into valve body, and ensure it slides smoothly in and out. If valve body is damaged, replace valve body and cut-off valve as a unit.
    NOTE: Cut-off valve, control valve and plungers are sized to fit valve body. If any of these need replacement, ensure new part has same identification letter.
  2. Inspect plungers for scoring or scratching. Insert plungers into valve body and check for smooth operation. Replace any damaged plunger. If valve body is damaged, replace valve body as a unit.
  3. Check control valve for scoring or scratches. Insert reaction control valve into valve body and check for smooth operation. If valve body is damaged, replace valve body as a unit.
scientia non olet · About Mike's Workshop Manuals