DTC 13 - Open Motor Circuit Or Abnormal Throttle Angle Sensor: Notes

SIGNAL

CCM applies voltage and ground to both the open side and close side of DC servo motor as driving conditions demand changing throttle angles. CCM also supplies a reference voltage and ground to throttle angle sensor inside cruise control actuator. Throttle angle signal is sent to CCM. CCM uses this information to judge throttle angle and throttle movement whenever DC servo motor is operated.

1. Checks for short to ground in Red/Green wire.
2. Checks for short to ground in Red/Black wire.
3. Checks for short to ground in Blue/Orange wire.
4. Checks for short to ground in Light Green wire.
5. Checks for short to ground in Blue/Red wire.
6. Checks for open in Blue/Red wire.
7. Checks for open in Light Green wire.
8. Checks for open in Blue/Orange wire.
9. Checks for open in Red/Black wire.
10. Checks for open in Red/Green wire.
11. Checks resistance of throttle angle sensor.
12. Checks throttle angle sensor signal.
13. Checks for proper motor actuation in open direction.
14. Checks for proper motor actuation in close direction.