Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Geo >> 1992 >> Tracker Base, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Lubrication >> Checking Fluid Level >> Transaxle & Transmission

Transaxle & Transmission

  1. Engine must be at normal operating temperature. Park vehicle on level surface, and apply parking brake. Place selector lever in PARK position.
  2. Start engine, and allow it to idle. Apply brakes, shift through all gears and return selector lever to PARK position.
  3. Remove dipstick. Fluid level should be in HOT or FULL HOT range. Add fluid (if necessary), and recheck level. DO NOT  overfill.
scientia non olet · About Mike's Workshop Manuals