Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Geo >> 1990 >> Storm Base, Automatic, F3A/MX1 >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Servicing - A/T) >> Lubrication >> Checking Fluid Level >> Transaxle

Checking Fluid Level: Transaxle

WARNING: This page is about a different car, the 1989 Geo Spectrum, 1988 Chevrolet Spectrum, 1987 Chevrolet Spectrum, and 1986 Chevrolet Spectrum. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engine must be at normal operating temperature. Park vehicle on level surface and apply parking brake. Place selector lever in the "P" (Park) position, start engine and allow engine to idle for 2 minutes. Apply brakes, shift through all gears and return selector lever to the "P" position.
  2. Remove dipstick. Fluid level should be in "HOT" or "FULL HOT" range. Add fluid if necessary. DO NOT  overfill.
scientia non olet · About Mike's Workshop Manuals