Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2024 >> GV80 2.5T Advanced >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System Diagnosis >> DTC P1C2B-00: OPI Hall Sensor Error >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

Troubleshooting Condition Possible Cause
DTC Strategy
  1. Current value monitoring
  1. Poor connection
  2. Faulty EOP circuit
  3. Faulty EOP
  4. Faulty TCM
Enable Conditions
  1. When entering ISG
Threshold Value
  • Hall sensor voltage is 6 to 17V
  • Hall sensor current is more than 400 mA or less than 0.25 mA
Detecting Time
  1. More than 3 sec
MIL ON Condition
  1. No MIL On
Fail Safe
  1. ISG prohibited
scientia non olet · About Mike's Workshop Manuals