Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2024 >> GV80 2.5T Advanced >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 2.5L (6 Of 6) >> DTC U1112-F2: LIN Communication Error >> DTC Information And Inspection >> DTC Setting Condition

DTC Setting Condition

Trouble Shooting Condition
Main Action 
  • Monitor the LIN data
Prerequisite Condition 
  • IG ON
  • Power Voltage: 9V to 16V
Threshold Value 
  • Signal: Short-to-Power
  • Signal: Short-to-Ground
Diagnosis Time 
  • 2 sec.
MIL* 
  • 2nd Driving Cycle*
Driving Cycle* 
: DC*
  • When [IG ON→Engine ON→IG OFF→IG ON] is performed, the Driving Cycle* 1time (1DC) is completed.
  • When the fault detected during the 1st DC is still detected during the 2nd DC, the fault is determined. And then 'MIL ON' is output from "ECM"/"PCM".
MIL* 
  • Malfunction Indicator Lamp
scientia non olet · About Mike's Workshop Manuals