Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2024 >> G70 2.5T, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Front Radar System >> Smart Cruise Control (SCC) Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the steering wheel.

    (Refer to Steering System - "STEERING WHEEL ")

  3. Remove the paddle shift lever and connector (A).
    G16833049Courtesy of HYUNDAI MOTOR AMERICA
    G16833050Courtesy of HYUNDAI MOTOR AMERICA
  4. Loosen steering wheel switch mounting screws.

    [Rear] 

    G16833051Courtesy of HYUNDAI MOTOR AMERICA
    G16833052Courtesy of HYUNDAI MOTOR AMERICA

    [Front] 

    G16833053Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect switch connectors and then remove the steering wheel switch (A).
    G16833054Courtesy of HYUNDAI MOTOR AMERICA
    G16833055Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals