Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2024 >> G70 2.5T, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Module Diagnosis >> DTC B163E-00: Rain Sensor Module LIN Fault >> DTC Information And Inspection >> Monitor DTC Status

Monitor DTC Status

  1. Connect GDS and select the "DTC Analysis" mode.
  2. Click the "DTC Status" to check the DTC information.
  3. Read the "DTC Status" parameter, and Record all DTCs, DTC state and freeze frame data.
  4. Is the DTC active?

    YES 

    NO 

    • This can occur when the BCM's memory is not cleared after the repair.

      → Go to the "VERIFICATION OF VEHICLE REPAIR " procedure.

    • Inspect an intermittent fault caused by Poor Contact in the RSM's and/or the BCM's connector.
scientia non olet · About Mike's Workshop Manuals