Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2023 >> G80 2.5T Advanced, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Occupant Classification System Diagnosis) >> DTC B1764-00: OCS MAT Defect >> DTC Information And Inspection >> Monitor Scantool Data

Monitor Scantool Data

WARNING: This page is about a different car, the 2024 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect GDS to Data Link Connector (DLC)
  2. Ignition switch ON and the Engine OFF, select "Diagnostic Trouble Codes (DTC)" mode.
  3. Monitor diagnostic trouble code and present of trouble code.
  4. Using the GDS, clear the DTC.
  5. The seats must be taken by adults.
  6. Monitor the "Read Class Status" Of the "Current Data" parameter on the GDS.
G15569182Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals