Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2023 >> G80 2.5T Advanced, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Cluster Module Diagnosis) >> DTC B1000-51: EOL Not Programmed >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different car, the 2024 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
Item Detecting Condition Possible Cause
Main Action
  • Monitor the CAN data
  1. Discordance with vehicle information
  2. Variant coding procedure is not conducted
  3. Faulty SCC/EPB/ABS/SRSCM/PSB/AFLS/MDPS/4WD/ESP/TPMS/LKAS/ECS/TCU/AHLS
  4. Faulty CAN line
  5. Faulty Cluster*
Prerequisite Condition
  • IG ON
Threshold Value Case 1
  • Cluster* coding: Not conducted
Case 2
  • An error occurred in the early stage of cluster coding
Diagnosis Time
  • 2 sec.
Component Name_ETM ETM
Cluster*
CLU*		 "INSTRUMENT CLUSTER" SD200-10
4WD "4WD ECU" SD200-4
AFLS "HEAD LAMP LH
"HEAD LAMP RH"		 SD200-6
AHLS "ACTIVE HOOD CONTROL UNIT" SD200-8
ECS "ECS UNIT" SD200-2
IEB
ABS
ESC
EPB		 "IEB UNIT" SD200-2
SD200-4
LKAS "LKAS UNIT" SD200-8
MDPS "MDPS UNIT" SD200-2
PSB "PRE-ACTIVE SEAT BELT UNIT" SD200-6
SCC "SMART CRUISE CONTROL RADAR" SD200-8
SRSCM "SRS CONTROL MODULE" SD200-2
TCU "TCM" SD200-4
TPMS "IBU" SD200-4
scientia non olet · About Mike's Workshop Manuals