Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2023 >> G80 2.5T Advanced, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Control System - 2.5L) >> Rail Pressure Sensor (RPS) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2024 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the diagnostic tool on the Data Link Connector (DLC).
  2. Measure the output voltage and fuel pressure of the RPS at idle and various engine speed.
    Condition Output Voltage (V)
    Idle About 1.2
    1500 RPM 2.0-2.2
    6300 RPM About 2.8