Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2023 >> G80 2.5T Advanced, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Control System - 2.5L) >> Fuel Tank Pressure Sensor (FTPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2024 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch "OFF" the ignition and disconnect the battery negative (-) terminal.
  2. Remove the Fuel Tank.

    (Refer to fuel supply unit - "FUEL TANK ")

  3. Disconnect the fuel pressure tank sensor connector (A).
  4. Remove the fuel tank pressure sensor (B) then vertically remove the sensor from the sub fuel sender.
    G15547415Courtesy of HYUNDAI MOTOR AMERICA