Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2023 >> G80 2.5T Advanced, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Engine Control System - 3.5L) >> RCV Control Solenoid Valve >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2024 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the RCV control solenoid valve connector.
  3. Measure resistance between the valve terminals 1 and 2.
  4. Check that the resistance is within the specification.

Specification:  Refer to "SPECIFICATION "

scientia non olet · About Mike's Workshop Manuals