Repair Procedures: Removal
WARNING: This page is about a different car, the 2024 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
- Perform the oil pressure characteristics backup procedure using the diagnostic tool when replacing with a new TCM.
- Turn ignition switch OFF and disconnect the negative (-) battery cable.
- Remove the engine room cover (A).
- Disconnect the ECM connector (A) and TCM connector (B).
- Remove the ECM & TCM bracket (A) after loosening the mounting nuts.
Tightening torque:
8.8 - 11.8 N.m (0.9 - 1.2 kgf.m, 6.5 - 8.7 lb-ft)
- Remove the TCM (A) after loosening the mounting bolts.
Tightening torque:
8.8 - 11.8 N.m (0.9 - 1.2 kgf.m, 6.5 - 8.7 lb-ft)