Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2023 >> G80 2.5T Advanced, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Front Radar System) >> Smart Cruise Control (SCC) Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2024 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Turn the steering wheel so that the front wheels are placed in the straight ahead position.
  3. Remove the steering wheel.

    (Refer to Steering System - "STEERING COLUMN AND SHAFT ")

  4. Loosen the mounting screws and remove the paddle shift switch (A).
    G15555318Courtesy of HYUNDAI MOTOR AMERICA
    G15555319Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the paddle shift switch connector (A).
    G15555320Courtesy of HYUNDAI MOTOR AMERICA
    G15555321Courtesy of HYUNDAI MOTOR AMERICA
  6. Loosen the mounting screws and remove the lower cover (A).
    G15555322Courtesy of HYUNDAI MOTOR AMERICA
  7. Disconnect the remote control switch connector (A).
    G15555323Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals