Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2023 >> Electrified GV70 Advanced >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag Module >> Side Airbag (Sab) Module >> Procedures >> (Side Airbag (Sab) Module Removal And Installation)

(Side Airbag (Sab) Module Removal And Installation)

Abbreviated Procedures

Work H/W Tightening Torque N.M (Kgf.M/Lb-Ft) Sst/Equipment Chemical Etc
  • Removal 
1 Shut Off The High Voltage Circuit - - Diagnostic Tool - -
2 Remove The Front Anchor Seat Belt - - - - -
3 Remove The Front Seat Assembly Bolt 49.0 - 63.7 (5.0 - 6.5/36.2 - 47.0) - - -
4 Disconnect The Front Seat Connector - - - - -
5 Remove The Front Seat Shield Front Cover Screw - - - -
6 Remove The Front Seat Outer Shield Cover - - - - -
7 Disconnect The Front Seat Power Switch Connector - - - - -
8 Remove The Front Seat Shield Inner Cover - - - - -
9 Remove The Front Seat Headrest - - - - -
10 Disconnect The Center Airbag Connector - - - - -
11 Disconnect The Side Airbag Connector - - - - -
12 Remove The Front Seat Lower Protector - - - - -
13 Disconnect The Front Seat Heater Connector - - - - -
14 Remove The Front Seat Back Board Hook - - - Refer To Shop Repair Information
15 Disconnect The Ergo Motion Seat Connector - - - - -
16 Disconnect The Ergo Motion Seat Tube - - - - -
17 Remove The Mounting Bolts, Detach The Front Seat Back Frame And Front Seat Cushion Frame Bolt 44.1 - 53.9 (4.5 - 5.5/32.5 - 39.8) - - -
18 Remove The Headrest Guides - - - - -
19 Disconnect The Front Seat Back Air Ventilation Blower Connector - - - - -
20 Remove The Front Seat Back Cover Protector [Upper, Lower, Lh/Rh] - - - - -
21 Remove The Front Seat Back Cover Assembly - - - - -
23 Remove The Side Airbag Module Nut 5.9 - 7.8 (0.6 - 0.8/4.3 - 5.8) - - -
  • Installation 
Install In The Reverse Order Of Removal  
  • Additional Work