Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2022 >> G70 2.0T, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Front Driveshaft Assembly) >> Dynamic Damper >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the front drive shaft.

    (Refer to Driveshaft Assembly - "FRONT DRIVESHAFT ")

  2. Remove the trans axle side joint.

    (Refer to Driveshaft Assembly - "Joint Assembly (Transaxle side) ")

  3. Remove the dynamic damper band (A, B) using driver (-).
    G15588262Courtesy of HYUNDAI MOTOR AMERICA
    G15588263Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • When removing the dynamic damper, lubricate the shaft with soapy water to prevent shaft damage.
  4. Remove the dynamic damper (A).
    G15588264Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals