Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2021 >> GV80 3.5T Advanced >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Control System - 2.5L) >> Purge Control Solenoid Valve (PCSV) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF.
  2. Disconnect the PCSV connector.
  3. Measure resistance between the PCSV terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification  : Refer to "SPECIFICATION "

scientia non olet · About Mike's Workshop Manuals