SVM system input/output

1. Camera input

   Category		Specification
   Lens angle of view		190°
   Angle of view	Horizontal	186°
   	Vertical	135°
   Provided function		Original wide angle image is provided (No additional functions)
   Applied position		Applied to front/rear/left/right cameras

2. SVM image display

   The images received from the 4 cameras mounted on the vehicle go through the image distortion correction logic and the image merging process. H/UNIT displays these images together with other additional features such as the parking guidelines linked with steering wheel on the AVN screen.

3. Parking/view button

   It is used as a control input signal to operate the front view mode function with the ignition switch ON.

4. Ignition input

   SVM unit displays the image only in the IGN2 ON and limits the image display with the SVM OFF in the IGN2 OFF. SVM unit uses the signal which is input to the IGN pin or M-CAN message routed from the IGPM (gateway) to C-CAN to judge the IGN2 ON/OFF.

5. Switch indicator display

   SVM unit displays the LED power inside the SVM switch in the form of PWM waves to inform the user whether SVM switch is pressed.

6. Chassis CAN input (C_CAN)

   SVM unit receives the vehicle state information through the C_CAN to determine the operation of SVM major functions.

7. Multimedia CAN input/output

Relevant information is processed by receiving the M-CAN signal routed from the IGPM (gateway) to C-CAN.

The routed M-CAN signal communication aims to transmit and receive the below information.