Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2021 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Smart Key System Diagnosis) >> DTC B1602-00: CAN Line Error >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2022 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.
Item Detecting Condition Possible Cause
DTC Strategy
  • CAN Signal Check
  1. Driver door opens, No sleeping mode in Smartkey Unit
  1. Open or short circuit in CAN High line
  2. Open or short circuit in CAN Low line
  3. Short circuit in CAN High and Low circuit.
NOTE: Signal level in sleeping mode
  • CAN High line: low
  • CAN Low line: high
Enable Conditions
  • Ignition "ON"
  • Normal Auxiliary Battery
  • At the state of input battery voltage into a SMK (IBU Module)
Threshold Value
  • CAN High/Low: Voltage is "0" means short to ground, Voltage is "B+" means short to battery
Diagnostic Time
  • Above 2 seconds
DTC Erasing Time
  • Immediately
scientia non olet · About Mike's Workshop Manuals