Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2021 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 5.0L (3 Of 9) >> DTC P014A-00: O2 Sensor Delayed Response - Rich to Lean Bank 2 Sensor 2 >> DTC Inspection >> Monitor GDS Data

Monitor GDS Data

  1. Connect GDS to DLC (Data Link Cable).
  2. Warm up the engine to normal operating temperature.
  3. Monitor "HO2S (B2/S2)" parameter on the "Current Data" with GDS.
    G14234454Courtesy of HYUNDAI MOTOR AMERICA
  4. Are the parameters displayed correctly?

    YES 

    • Fault is intermittent caused by poor contact in the sensor's and/or ECM's connector or was repaired and ECM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR ".

    NO 

scientia non olet · About Mike's Workshop Manuals