Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2021 >> G90 3.3T Premium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Steering Column Module Diagnosis) >> DTC B1602-00: CAN Line Error >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2022 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.
Item Detecting Condition Possible cause
DTC Strategy
  • CAN signal monitoring
  1. SCM (Steering Column Module) Connector
  2. Open or short communication line
  3. SCM (Steering Column Module)
Enable Conditions
  • IG KEY ON
Threshold Value
  • CAN Bus-Off event
Diagnostic Time Qualification
  • More than 2 sec
De-Qualification
  • In case of CAN Error normal
  • In case of normal for 30 consecutive cycles
scientia non olet · About Mike's Workshop Manuals