Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2021 >> G90 3.3T Premium, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 3.3L (9 Of 9) >> DTC U0109-00: Lost Communication With Fuel Pump Control Module >> Wiring Inspection >> Signal Circuit Inspection >> Open Check

Open Check

  1. IG "OFF".
  2. Disconnect FECM and ECM (ECM) connector.
  3. Measure resistance between P-CAN HIGH terminal (LOW terminal) of the FECM harness connector and P-CAN HIGH terminal (LOW terminal) of the ECM (ECM) harness connector.

    Specification:  Approx. below 1Ω

  4. Is the measured value within specifications?

    YES 

    NO 

    • Repair open in P-CAN BUS line between FECM harness connector and ECM (ECM) harness connector and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About Mike's Workshop Manuals