Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2021 >> G80 2.5T Advanced, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 21 (4WD Control System Diagnosis) >> DTC U0126-00: Lost Communication With Steering Angle Sensor Module >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Trouble Shooting Condition Possible Cause
Main Action
  • SAS CAN signal is detected
  1. Poor connection
  2. Open/short in circuit
  3. SAS (MULTIFUNCTION SWITCH)
Prerequisite Condition
  • Turn engine ON
Threshold Value
  • No SAS message
Diagnostic Time
  • 2 sec
scientia non olet · About Mike's Workshop Manuals