Special Service Tools
| Tool Name/Number | Illustration | Description |
|---|---|---|
| LKA Compensator (09890-3V100) |
Used for compensating front view camera unit | |
| Vertical measuring instrument (09964-C1200) |
Used to measure left/right tilts when automatic tolerance compensation for front camera is performed. Use together with the (09890-3V100). However, do not use it if vertical measuring instrument (09958-3T060) is available. |
|
| Calibration Reflector 0K964-J5100 |
Used for front radar unit setting. | |
| BCW Sensor Correction Tool Set (09958-3T500) | Used to correct the blind-spot radar unit. | |
| Case, Manual, String (09958-3T120) |
Used to correct the blind-spot radar unit. Used to create a center line. |
|
| Vertical Plumb (09958-3T010) |
Used to correct the blind-spot radar unit. Used to create a center line. |
|
| Spirit Level (09958-3T070) |
Used to correct the blind-spot radar unit. Used to measure the horizontal angle. |
|
| BCW Unit Fixing Adaptor (09958-3T080) |
Used to correct the blind-spot radar unit. Used to measure the horizontal angle. |
|
| Digital Protractor (09958-3T090) |
Used to correct the blind-spot radar unit. Used to measure the horizontal angle. |
|
| Digital Inclinometer (09958-3T100) |
Used to correct the blind-spot radar unit. Used to measure the vertical angle. |
|
| SCC Setting Reflector (09964-C1100) |
Used for front radar unit setting |