Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2020 >> G80 3.8, AWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> E-Shifter Diagnosis >> DTC C1604-04: ECU Hardware Error >> Verification Of Repair >> Verification Of Vehicle Repair

Verification Of Vehicle Repair

  1. After connecting the GDS, perform self-diagnosis to check the fault code.
  2. Clear stored fault codes by using the GDS.
  3. Drive the vehicle according to the fault detection conditions.
  4. Perform self-diagnosis to check the fault code whether the failure occurs again.
  5. Does fault code return?

    YES 

    • Perform appropriate DTC INDEX diagnostic procedures.

    NO 

    • System works normally.
scientia non olet · About Mike's Workshop Manuals