Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2019 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 219 (Multi-View Camera System Diagnosis) >> DTC B16BA-00: Right Camera Input Error >> Verification of Repair >> Verification of Vehicle Repair

Verification of Vehicle Repair

WARNING: This page is about a different car, the 2017 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC's)" mode.
  2. Using GDS, Clear DTC.
  3. Operate the vehicle within DTC Enable conditions in General Information.
  4. Are any DTCs present?

    YES 

    • Go to the applicable troubleshooting in this procedure.

    NO 

    • System is performing to specification at this time.
scientia non olet · About Mike's Workshop Manuals