Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2019 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Heater System) >> Console Temperature Control Actuator >> Repair Procedures >> Replacement >> [Console Temperature Control Actuator]

[Console Temperature Control Actuator]

WARNING: This page is about a different car, the 2017 Genesis G90. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the floor console assembly.

    (Refer to Body (Interior and Exterior) - "FLOOR CONSOLE ")

  3. Disconnect the connector (A) and then remove the console temperature control actuator (B) after loosening the mounting screws.
    Fig 1: Locating Console Temperature Control Actuator And Connector
    G11420085Courtesy of HYUNDAI MOTOR AMERICA
  4. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals