"Fault Code" Analysis

Connect the GDS to the vehicle's DLC connector.
Engine ON.
Press "Diagnostic Trouble Codes (DTC)" button after selecting system and select the DTC status button in order to check DTC Information.
Check "DTC status".
"Current DTC"
- Perform the following procedure.
  "History DTC"
- After a repair, when the active code were not erased or may be due to temporary malfunctioning of poor contact of the power side.
  Overall, check the connector for loose, poor contact, bending, corrosion, contamination, alteration, or damage
- Repair or replace if necessary, after that please perform "VERIFICATION OF VEHICLE REPAIR'S " procedure.