Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2019 >> G80 3.8, AWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> 4WD Control Diagnosis >> DTC P310D: System Failure - Position During Calibration >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Position sensor monitoring while learning.
  1. 4WD ECU
Enable conditions
  • Clutch controller normal condition (4WD SW)
Threshold value
  • Position sensor failed at least 4 times during torque control learning
Diagnostic Time
  • Immediately
Fail Safe
  • Restricted 4WD
scientia non olet · About Mike's Workshop Manuals