Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2019 >> G70 3.3T Design, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Control System - 2.0L) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Inspection >> ETC Motor

ETC Motor

WARNING: This page is about a different variant/trim than selected.
  1. Switch "OFF" the ignition.
  2. Disconnect the ETC module connector.
  3. Measure resistance between the ETC module terminals 3 and 6.
  4. Check that the resistance is within the specification.

    Specification:  0.3 - 100 Ω [20°C (68°F)]

scientia non olet · About Mike's Workshop Manuals