Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2019 >> G70 3.3T Design, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 3.3L (2 Of 6) >> DTC P0136-00: O2 Sensor Circuit (Bank 1 Sensor 2) >> Wiring Inspection >> Ground Circuit Inspection >> Check Resistance

Check Resistance

  1. Ignition switch is turned "ON". Disconnect HO2S (B1/S2) connector.
  2. Measure resistance between ground terminal of HO2S (B1/S2) harness connector and chassis ground.

    Specification:  Approx. 0Ω

  3. Is resistance within the specification?

    YES 

    NO 

scientia non olet · About Mike's Workshop Manuals