Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2019 >> G70 2.0T Advanced, RWD, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Automatic Transaxle System Diagnosis) >> DTC P0880-00: TCM Power Input Signal >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different variant/trim than selected.
Item Detecting Condition Possible Cause
DTC Strategy
  • Voltage monitoring
  1. Poor connector connection
  2. Circuit open or short
  3. TCM
Enable Conditions
  • Battery voltage is between 7 and 24V
Threshold Value
  • Actuator power supply voltage is higher than 20V or lower than 7V
Detecting Time
  • 1event
MIL illum.
  • 2 driving cycles
Fail Safe Condition
  • Limp Home Mode
    • 5th gear fixed
    • Manual shift is not allowed
scientia non olet · About Mike's Workshop Manuals