Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2019 >> G70 2.0T Advanced, RWD, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (4WD Control System Diagnosis) >> DTC P1836-00: Pressure Line Check Error >> Verification Of Repair >> Verification Of Vehicle Repair

Verification Of Vehicle Repair

WARNING: This page is about a different variant/trim than selected.

After repair, it is essential to verify if the faults have been corrected.

  1. Connect the GDS and select the "Diagnostic Trouble Codes (DTC)" mode.
  2. Test the vehicle according to the DTC Prerequisite Condition in DTC Information.
  3. Using the GDS, diagnose the vehicle and see if the DTC returns.
  4. Did the same DTC return?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • The system performs in accordance with the specifications at this time.
scientia non olet · About Mike's Workshop Manuals