Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2019 >> G70 2.0T Advanced, AWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> E-Shifter Diagnosis >> DTC C1534-64: Unlock Switch Fault >> DTC Inspection >> Service Data Analysis

Service Data Analysis

  1. Self-diagnostic connector of the vehicle is connected to the GDS.
  2. Engine ON.
  3. Select the "Current Data".
  4. Check "Unlock button state"

    Normal value  : OFF → ON

    YES 

    • After a repair, when the active code were not erased or may be due to temporary malfunctioning of poor contact of the power side.

      Overall, check the connector for loose, poor contact, bending, corrosion, contamination, alteration, or damage.

    • Repair or replace if necessary. Go to "VERIFICATION OF VEHICLE REPAIR ".

    NO 

scientia non olet · About Mike's Workshop Manuals