Component Inspection: Notes
- Ignition "ON" & Engine "OFF" and Using a GDS, clear the DTC.
- Ignition "OFF".
- Disconnect the battery (-) terminal cable from the battery, and wait at least one minutes.
- Disconnect Bodysensor OCU (ECU) connector.
- Substitute the Bodysensor OCU (ECU) and check for proper operation.
- Is DTC present problem?
YES
- Substitute a known-good Bodysensor OCU (ECU) main harness, and check for proper operation.
If the problem is corrected, replace Bodysensor OCU (ECU) main harness and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Substitute a known-good Bodysensor OCU (ECU), and check for proper operation.
If the problem is corrected, replace Bodysensor OCU (ECU) and then go to "VERIFICATION OF VEHICLE REPAIR " procedure and Go to "BODYSENSOR RESET " procedure.
- Substitute a known-good Bodysensor OCU (ECU) main harness, and check for proper operation.