Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2019 >> G70 2.0T Advanced, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 2.0L (3 Of 4) >> DTC P2017-00: Intake Manifold Runner Position Sensor/Switch Circuit High (Bank 1) >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
Main Action
  • Electrical Check
  1. Poor connection or damaged harness
  2. Open/short to battery in VCM position sensor circuit
  3. VCM position sensor
Prerequisite condition
  • Battery voltage is between 10V and 16V.
  • Ignition switch is turned "ON".
Threshold Value
  • Port flap feedback signal voltage is higher than 4.858V.
  • Sensor signal circuit is open or shorted to battery power supply line.
Diagnosis Time
  • 0.12 Seconds
Mil On Condition
  • 2nd Driving Cycle
scientia non olet · About Mike's Workshop Manuals