| Main Action |
|
- Short to battery in harness
- Poor connection or damaged harness
|
| Case 1 |
Prerequisite condition |
- Elapsed time after ignition switch turned "ON" is longer than 0.1 seconds.
- Engine is stopped.
- No main relay related failure is detected.
|
| Threshold Value |
- Alternator load is less than 15%
|
| Diagnosis Time |
|
| Case 2 |
Prerequisite condition |
- No relevant failure (DTC) is detected.
- Battery voltage is lower than 16V.
- Engine speed is between 600 rpm and 4000 rpm.
- Engine coolant temperature is higher than 73°C (140°F).
|
| Threshold Value |
- Alternator load is less than 2%.
|
| Diagnosis Time |
|
| MIL On Condition |
|