Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2019 >> G70 2.0T Advanced, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 2.0L (2 Of 4) >> DTC P0300-00: Random/Multiple Cylinder Misfire Detected >> System Inspection >> Visual Inspection

Visual Inspection

  1. Visually/physically inspect for the following conditions
    • Vacuum hoses in engine room for splits, kinks and improper installation
    • Positive crankcase ventilation valve for improper installation, damaged O-rings and malfunctioning.
    • Verify that the ECM ground connections are clean and properly tightened.
  2. Check MAFS and ECTS for the following conditions:
    • Contamination, deterioration, poor connection or damaged harness
    • The MAF signal displayed on the GDS should increase as engine speed increases
    • The engine coolant temperature displayed on the GDS should close to the actual coolant temperature.
  3. Was a problem found in any of the above areas?

    YES 

    NO 

    • Go to next procedure.
scientia non olet · About Mike's Workshop Manuals