Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2019 >> G70 2.0T Advanced, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 2.0L (1 Of 4) >> DTC P0136-00: O2 Sensor Circuit (Bank 1/Sensor 2) >> Wiring Inspection >> Ground Circuit Inspection >> Check Resistance

Check Resistance

  1. Turn "OFF" the ignition switch. Disconnect HO2S connector.
  2. Measure resistance between ground terminal of HO2S (B1/S1) harness connector and chassis ground.

    Specification:  Approx. 0Ω

  3. Is resistance within the specification?

    YES 

    • Go to "Component Inspection" procedure below.

    NO 

scientia non olet · About Mike's Workshop Manuals