Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2019 >> G70 2.0T Advanced, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Front View Camera Diagnosis >> DTC C1604-49: ECU Hardware Error >> Verification Of Repair >> Verification Of Vehicle Repair

Verification Of Vehicle Repair

After repair, it is essential to verify if the faults have been corrected.

  1. Connect GDS with the vehicle and select the "Diagnostic Trouble Codes (DTCs)" mode.
  2. Clear the DTC using GDS.
  3. Test the vehicle according to the DTC Enable (prerequisite) Condition in DTC Information.
  4. Confirm the diagnosis of the vehicle and check if any DTC returns.
  5. Did the same DTC return?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • The system performs in accordance with specifications at this time.
scientia non olet · About Mike's Workshop Manuals