Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2018 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System Control Module (SRSCM) And Sensors >> Front Impact Sensor (FIS) >> Repair Procedures >> Removal

Repair Procedures: Removal

CAUTION:
  • Removal of the airbag must be performed according to the precautions/procedures described previously.
  • Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
  • Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the engine cover.

    (Refer to Engine and Transaxle Assembly - "ENGINE COVER ")

  3. Disconnect the front impact sensor connector (A).
    G12717902Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the front impact sensor (A) after loosening the mounting bolt.
    G12717903Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals