Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Engine Control System - 3.8L) >> Rail Pressure Sensor (RPS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Install the component with the specified torques.
  • Note that internal damage may occur if the component drops. In this case, inspect it before installation.
  1. To install, reverse the removal procedure.

    Rail Pressure Sensor Installation: 

    29.4 ~ 34.3 N.m (3.0 ~ 3.5 kgf.m, 21.7 ~ 25.3 lb-ft)

scientia non olet · About Mike's Workshop Manuals