Repair Procedures: Installation
WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Install the component with the specified torques.
- Note that internal damage may occur if the component drops. In this case, inspect it before installation.
CAUTION:
- Apply the sealant (LOCTITE FED546 or equivalent) to the sensor.
CAUTION:
- Insert the sensor in the installation hole and be careful not to damage during installation.
- To install, reverse the removal procedure.
CVVT oil temperature sensor installation:
14.7 ~ 21.6 N.m (1.5 ~ 2.2 kgf.m, 10.8 ~ 15.9 lb-ft)