Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Engine Control System - 5.0L) >> Engine Coolant Temperature Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the engine coolant temperature sensor connector (A), and then remove the engine coolant temperature sensor (B).
    G11336648
  3. Supplement the engine coolant.

(Refer to ENGINE COOLING SYSTEM - 5.0L Engine Mechanical System )

scientia non olet · About Mike's Workshop Manuals