Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Genesis >> 2017 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Supplemental Restraint System Control Module & Sensors) >> Occupant Classification System (OCS) >> Repair Procedures >> Removal >> OCS Mat

OCS Mat

WARNING: This page is about a different car, the 2017 Genesis G80. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the front passenger seat assembly.

    (Refer to Body - "FRONT SEAT ")

  3. Disconnect the OCS ECU connector.
  4. Remove the front seat cushion assembly.

    (Refer to Body - "FRONT SEAT CUSHION COVER ")

scientia non olet · About Mike's Workshop Manuals